Engineering, 30.06.2020 15:01 jaimevalenzuela60

A mixture of ethyl alcohol and water with equimolar concentration is to be distilled in a seven plates column as a batch distillation with a reboiler at atmospheric pressure, if we neglect the residue liquid in condenser and reboiler, calculate :- A) State-1 (Constant XD).
The amount of distilled (D) and the a mount of heat required for ( 100 Kmole of Feed ) to get xD = 80 mole% , if R (reflux ratio must be increased till it reach=6.0 ) .
B) State-2 (Constant reflux ratio R).
The average value of xD (top product) & the a mount of heat if the concentration in the boiler must not less than 10 mole% ethanol if R is constant at = 4.0.
VLE for Ethanol-water are given in curve below:-

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

You know the right answer?

A mixture of ethyl alcohol and water with equimolar concentration is to be distilled in a seven plat...

Questions