A sintered structure is formed from 20 um powders. After sintering to 92% density, the pores are 1 um as the compact enters final-sage sintering. Sintering in argon results in less than full density. Predict the final pore size and density. What alternative might be considered for reaching full density

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

List five instruments for angular measurement and explain one of them witlh appropriate diagram(s)