Homework H8.B Given: A T-shaped structural member is fixed to ground at end D. A cable is attached to point C on the member, is wrapped around an ideal pulley at B, and is connected to ground at end A. The cable carries a known pre-tension of T. Both sections of the cable not in contact with the pulley are horizontal. The member supports a block of weight W at end E. Assume the weight of the member and pulley to be negligible compared to the applied loads. Find: Determine the reactions acting on the member at end D. Express yo

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

What precautions should you take to prevent injuries when dealing with heavy loads?