Engineering, 03.07.2020 21:01 bvbbridesmaid5519
Design a Low Pass FIR Filter with the following characteristics:
Passband 10kHz, Stopband 11kHz, and Sampling frequency 44kHz. Use window rectangular and filter length of 264.
Answer the following questions:
1) Determine the specs of the ideal LP desired, and sketch its frequency response.
2) Compute by hand, show all your work, the first 5 coefficients of the impulse response h(n).
3) Use MATLAB to plot both h(n), and the frequency response magnitude and phase of the filter you designed.
4) Comment on the expected performance of the filter you designed.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
You know the right answer?
Design a Low Pass FIR Filter with the following characteristics:
Passband 10kHz, Stopband 11kHz, an...
Questions
