Engineering, 05.07.2020 14:01 blakestuhan

For 120 consecutive days, a process engineer has measured the weight and examined the surface for imperfections of a component after it has been coated with a special paint. Each day, she takes a sample of 45 components. Across all sampled parts, the average weight is 112 grams, the standard deviation of weight is 0.16 gram, and there are in total 103 parts with surface imperfections. Round your answer to 4 digits after the decimal point if it is not an integer. Do NOT use comma in your numeric answers. Sample size is .Number of samples is .When constructing a x-bar chart:The center line should be .ESD(x-bar) equals .The upper control limit (UCL) should be .The lower control limit (LCL) should be .When constructing a p chart:The center line should be .ESD(p) equals .The upper control limit (UCL) should be .The lower control limit (LCL) should be

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 19:10

An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?

Answers: 2

Answer

You know the right answer?

For 120 consecutive days, a process engineer has measured the weight and examined the surface for im...

Questions