Engineering, 05.07.2020 14:01 bsmith892341

Suppose that you want to freeze 1 kg of water for a party, and only have 5 minutes to do it. Relying on nothing but your keen physical abilities, a dixicup, duct tape and a piece of string, you manage to build a refrigerator unit which can do the job. The temperature inside the refrigeration unit is 273 K, and the temperature outside is 350 K. Since you are a brilliant UIUC student, assume that your refrigerator has the maximum possible efficiency. The Latent Heat of Fusion of water is 3.33Ã—10^5 J/kgAssume that the initial temperature of the water is 273 K. Requried:a. What is the change (including the sign) in entropy in the water per second in J/(Ks)?b. What is the heat flow ( Q_hot/time ) into the Hot well per second in J/s?c. How much power must you provide to drive your refrigerator in Watt W? (That is work done per second?)

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

Answer

You know the right answer?

Suppose that you want to freeze 1 kg of water for a party, and only have 5 minutes to do it. Relying...

Questions