Engineering, 14.07.2020 14:01 janeou17xn

A gold vault has 3 locks with a key for each lock. Key A is owned by the manager whilst Key B and C are in the custody of the senior bank teller

and the trainee bank teller respectively. In order to open the vault door at

least two people must insert their keys into the assigned locks at the same

time. The trainee bank teller can only open the vault when the bank

manager is present in the opening.

i) Determine the truth table for such a digital locking system (4 marks)

ii) Derive and minimize the SOP expression for the digital locking system

Answers: 1

Show answers

Answers

Answer from: Tcareyoliver

i) Truth Table:

A | B | C | O

0 | 0 | 0 | 0

0 | 0 | 1 | 0

0 | 1 | 0 | 0

0 | 1 | 1 | 0 (condition 2 not satisfied)

1 | 0 | 0 | 0

1 | 0 | 1 | 1 (both conditions satisfied)

1 | 1 | 0 | 1 (both conditions satisfied)

1 | 1 | 1 | 1 (both conditions satisfied)

ii) The minimized sum of products (SOP) expression is

O = AC + AB

Explanation:

We have three inputs A, B and C

Let O is the output.

We are given two conditions to open the vault door:

1. At least two people must insert their keys into the assigned locks at the same time.

2. The trainee bank teller (C) can only open the vault when the bank manager (A) is present in the opening.

i) Construct the Truth Table

A | B | C | O

0 | 0 | 0 | 0

0 | 0 | 1 | 0

0 | 1 | 0 | 0

0 | 1 | 1 | 0 (condition 2 not satisfied)

1 | 0 | 0 | 0

1 | 0 | 1 | 1 (both conditions satisfied)

1 | 1 | 0 | 1 (both conditions satisfied)

1 | 1 | 1 | 1 (both conditions satisfied)

ii) SOP Expression using Karnaugh-Map:

A 3 variable Karnaugh-map is attached.

The minimized sum of products (SOP) expression is

O = AC + AB

The orange pair corresponds to "AC" and the purple pair corresponds to "AB"

Bonus:

The above expression may be realized by using two AND gates and one OR gate.

Please refer to the attached logic circuit diagram.

A gold vault has 3 locks with a key for each lock. Key A is owned by the

manager whilst Key B and C

Answer from: Quest

ck c slavs cl bs a

Answer from: Quest

answer: make you irritable

Another question on Engineering

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

Engineering, 05.07.2019 04:30

Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?

Answers: 2

Answer

Engineering, 06.07.2019 02:30

Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.

Answers: 3

Answer

Engineering, 06.07.2019 04:10

An array of m-50 thermoelectric modules is installed on the exhaust of a sports car. each module has an effective seebeck coefficient of sp of 0.143 5vk and an internal electrical resistance of r.-4 ? in addition, : (15 points each module is of width w 60mm and contains n=100 pairs of semiconducting pellets. each pellet hasan overall length of 2l-5mm and a cross-sectional area as 1.2 x 10'm and is characterized by a thermal conductivity of kpl2w rnk. the hot side of each module is exposed to exhaust gases at·p650c with hia4ow rrk while the osite side of each module is cooled by pressurized water at surface) and 156 °c (at the cool surface). 11s c with h: -500w/m'k. the modules are wired n series and the load resistance is r d=400ohm .the module surface temperatures, t, and ts are 183 "c (at the hot surface and 156c (at the cool surface) a)-draw a schematic of this scenario and label all parts. a. b. if the induced current, i, is 0.15 amps, what is the total power (pa) for one module? c. what is the total power harvest from the exhaust with all 50 modules?

Answers: 2

Answer

You know the right answer?

A gold vault has 3 locks with a key for each lock. Key A is owned by the manager whilst Key B and C...

Questions