Calculate the maximum intensity of the distributed load w, measured in kN/m, that the beam in Figure 3 can support. Given the angle of orientation at the middle portion of beam and
reactions of the supports are tabulated in Table 3.
Table 3: Angle of Orientation of Beam and Reactions at A and B
Forces/ Couples
Values
Unit
X
1.0
X2
3.0
Xi
5.0
0
20
VA
4
KN
Vg
KN
X1
X2
X3

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.