subject
Engineering, 14.07.2020 23:01 bribaby74

1 body - 4 pipes and 104 pipes per passage (each with a diameter of 2.6 cm, 4 m per passage A thin wall heat exchanger) will be used to heat the air. Water pipes to 8 kg / h at 350 K temperature With mass flow, air enters the body at 15 C with a mass flow of 18 kg / s. Over time, inside the pipe The pollution factor of the formed sediment is 0.0026 m2K / W. The transport coefficients on the inner and outer surfaces of the pipes are 450 and 200 W / m2K is estimated. Using specific temperatures at 25 C for air and water a-) The effectiveness of the heat exchanger by drawing the shape of the problem, b-) Heat transfer rate (kW), c-) Calculate the outlet temperatures (C) of the water and air and show the temperatures in the T_L diagram.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
1 body - 4 pipes and 104 pipes per passage (each with a diameter of 2.6 cm, 4 m per passage A thin w...
Questions
question
Mathematics, 12.06.2020 10:57
Questions on the website: 13722361