Engineering, 14.07.2020 01:01 xxchosenxx2954
is used to determine the shear stress at point P over the section supporting a downward shear force in the -y direction. What is Q
Answers: 2
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
is used to determine the shear stress at point P over the section supporting a downward shear force...
Biology, 29.10.2019 02:31
Mathematics, 29.10.2019 02:31
Mathematics, 29.10.2019 02:31
Chemistry, 29.10.2019 02:31
Mathematics, 29.10.2019 02:31
Mathematics, 29.10.2019 02:31
Mathematics, 29.10.2019 02:31