Engineering, 15.07.2020 21:01 titir15

A thick casting with a thermal diffusivity of 5 x 10-6 m2/s is initially at a uniform temperature of 150oC. One surface of the casting is suddenly exposed to a high-speed water jet at 20oC, resulting in a very large convective heat transfer coefficient (Hint: assume imposed surface temperature). The thermal conductivity of the casting is 20 W/m-K. Determine the temperature 20 mm in from the surface after 40 seconds. Check your answer using an alternative technique. Your final answer should be about 101.3 oC.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 19:10

A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.

Answers: 3

Answer

You know the right answer?

A thick casting with a thermal diffusivity of 5 x 10-6 m2/s is initially at a uniform temperature of...

Questions