Main circuit name: bitcounting
Engineering, 21.07.2020 20:01 mackenziewright2002
Bit counting [10]
Submission file for this part: 1.circ
Main circuit name: bitcounting
Input pin(s): twelvebitinput [12]
Output pin(s): zeroes [4]
Suppose we want to determine how many of the bits in a twelve-bit unsigned number are equal to zero. Implement the simplest circuit that can accomplish this task.
You may use any Logisim Evolution component for this problem. Note, however, your design must be combinational, you may not use any clocking or sequential solution.
Answers: 3
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 04.07.2019 19:10
Agas contained within a piston-cylinder assembly e end nation about same energy states, 1 and 2, where pi 10 bar, v undergoes two processes, a and b, between the sam 0.1 m3, ui-400 kj and p2 1 bar, v2 1.0 m2, u2 200 kj: process a: process from 1 to 2 during which the pressure- volume relation is pv constant process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to +20 0 state 2 kinetic and potential energy effects can be ignored. for each of the processes a and b, (a) sketch the process on p-v coordinates, (b) evaluate the work, in kj, and (c) evaluate process the heat transfer, in kj
Answers: 2
Engineering, 04.07.2019 19:20
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
Bit counting [10]
Submission file for this part: 1.circ
Main circuit name: bitcounting
Main circuit name: bitcounting
Mathematics, 01.06.2020 20:59
Social Studies, 01.06.2020 20:59
Mathematics, 01.06.2020 20:59
Mathematics, 01.06.2020 20:59
Computers and Technology, 01.06.2020 20:59
English, 01.06.2020 20:59
History, 01.06.2020 20:59
English, 01.06.2020 20:59
Chemistry, 01.06.2020 20:59
Engineering, 01.06.2020 20:59
Arts, 01.06.2020 20:59
History, 01.06.2020 20:59
History, 01.06.2020 20:59