subject
Engineering, 04.08.2020 16:01 kluckey3426

Multiple Unit Material balance problem A feed containing equimolar amounts of methanol and water is mixed with 10 moles of a 40 % mol aqueous methanol stream. The mixture enters a first separation unit that creates two streams. A top stream exits the separation unit that contains 70 % mol methanol and rest water. The bottom stream, which is 70 moles enters a second separation unit. A top stream exists the second separation unit as a 50 % methanol & 50 % water mixture. The other stream is unknown. If the fresh feed to the system is 100 moles (equimolar mixture) and the two top streams exiting the separation units have the same flow, draw the flow sheet and find the molar flow and the composition of the bottom streams existing the second separation unit?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
Multiple Unit Material balance problem A feed containing equimolar amounts of methanol and water...
Questions
question
Chemistry, 23.07.2020 01:01
Questions on the website: 13722361