subject
Engineering, 12.08.2020 05:01 breann6

Hot air enters a heat exchanger at 350°C and exits at (130+Ψ)°C. The heat extracted is used to boil (0.2 + Ψ/300) kg/s of 100°C water (from saturated liquid to saturated steam). The heat exchanger is a single-shell shell-and-tube heat exchanger with two tube passes. The overall heat transfer coefficient for the hot side is 240 W/(m^2°C). Assume a constant specific heat for air of cp = 1.005 kJ/(kg°C). The pressure of the hot air and the boiling water is P = 1.0 atm. Find the following: a. the NTU for the heat exchanger.
b. the effectiveness of the heat exchanger
c. the net heat transfer from the hot air.
d. the required hot-side area.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
You know the right answer?
Hot air enters a heat exchanger at 350°C and exits at (130+Ψ)°C. The heat extracted is used to boil...
Questions
question
Mathematics, 07.02.2021 20:50
question
Social Studies, 07.02.2021 20:50
question
Biology, 07.02.2021 20:50
question
Physics, 07.02.2021 20:50
question
Arts, 07.02.2021 20:50
Questions on the website: 13722361