Engineering, 12.08.2020 04:01 lil8174
) Suggest a forming process and illustrate how to mass produce pins from a very long rod. Label each component and show any motion with an arrow. b) Calculate the initial rod length to form one complete pin. c) Determine if the pin head can be formed on this machine with a single stroke. Why
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 Β°c to 80 Β°c; (b) a pump operating at about 25 Β°c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
Engineering, 05.07.2019 10:10
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
Engineering, 06.07.2019 02:30
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
) Suggest a forming process and illustrate how to mass produce pins from a very long rod. Label each...
Computers and Technology, 03.08.2019 02:00
History, 03.08.2019 02:00
Mathematics, 03.08.2019 02:00
Spanish, 03.08.2019 02:00
Mathematics, 03.08.2019 02:00
Geography, 03.08.2019 02:00
History, 03.08.2019 02:00
Biology, 03.08.2019 02:00