Engineering, 12.08.2020 22:01 jmoreno486
A receptacle, plug, or any other electrical device whose design limits the ability of an electrician to come in contact with any of its electrical connections is identified as safe.
a. feel
b. resessed
c. touch
d. removal
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 05.07.2019 23:20
Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket
Answers: 3
You know the right answer?
A receptacle, plug, or any other electrical device whose design limits the ability of an electrician...
Questions
Mathematics, 17.04.2022 21:40
Mathematics, 17.04.2022 21:40
History, 17.04.2022 21:40
Spanish, 17.04.2022 22:00
Mathematics, 17.04.2022 22:50
Mathematics, 17.04.2022 23:00
English, 17.04.2022 23:20
Chemistry, 17.04.2022 23:40
