Engineering, 13.08.2020 05:01 gg808

A heat pump system which uses R-134a operates on the ideal vapor compression heat pump cycle with a given compressor efficiency.--Given Values--Evaporator Temperature: T1 (C) = 0Condenser Temperature: T3 (C) = 37Heating Capacity: Qh (kW) = 5.8Compressor Efficiency: nc (%) = 84a) Determine the specific enthalpy (kJ/kg) at the compressor inlet. Your Answer =b) Determine the specific entropy (kJ/kg-K) at the compressor inlet. Your Answer =c) Determine the specific enthalpy (kJ/kg) at the compressor exit. Your Answer =d) Determine the specific enthalpy (kJ/kg) at the condenser exit. Your Answer =e) Determine the specific enthalpy (kJ/kg) at the evaporator inlet. Your Answer =f) Determine the coefficient of performance for the system. Your Answer =g) Determine the mass flow rate (kg/s) of refrigerant through the system. Your Answer =h) Determine the power input (kW)to the compressor. Your Answer =

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 18:20

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

Answer

You know the right answer?

A heat pump system which uses R-134a operates on the ideal vapor compression heat pump cycle with a...

Questions