subject
Engineering, 15.08.2020 19:01 betsylancer8522

Class hello Sarah{ Pubic static void(“hello Sarah”)
Name=input(“hello Sarah”)
Print(“hello Sarah”).

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
Class hello Sarah{ Pubic static void(“hello Sarah”)
Name=input(“hello Sarah”)
Print(“he...
Questions
question
Mathematics, 06.05.2020 06:07
question
Mathematics, 06.05.2020 06:07
question
Mathematics, 06.05.2020 06:08
question
Mathematics, 06.05.2020 06:08
Questions on the website: 13722363