Engineering, 19.08.2020 15:01 daliakreynin
Who wants to have a Zoom meeeting? Meeting ID: 872 6404 0748 Passcode: e Please don't report! : (
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12Β°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90Β° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90Β° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
You know the right answer?
Who wants to have a Zoom meeeting? Meeting ID: 872 6404 0748 Passcode: e Please don't report! : (...
Questions
Mathematics, 28.05.2020 10:03
Mathematics, 28.05.2020 10:03
Mathematics, 28.05.2020 10:03
Mathematics, 28.05.2020 10:03
English, 28.05.2020 10:03
Mathematics, 28.05.2020 10:03
