Engineering, 22.08.2020 17:01 mochoa4

What one test(not using the semicarbazone or 2,4-DNP derivatives) could be used to differentiate between the following pairs? Describe what you would observe. a. 2-Pentanone and 3-pentaone
b. Pentanal and 3-pentanone
c. 1-Propanol and 2-propanol
3. Indicate which of the following will give a positive iodoform test:.
acetone 2-pentanone 3-pentanone cyclohexanone
2-methylcyclohexanone ethanol 1-propoanol 2-propanol
t-butyl alcohol acetaldehyde propionaldehyde
4. An unknown compound's semicarbazone melts at 162-165 degree C. The compound does not give a silver mirror in the Tollens' test. On reaction with KI/I_2, NaOH/H_2O no straw yellow precipitate forms. Identify the unknown. Explain your reasoning.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

You know the right answer?

What one test(not using the semicarbazone or 2,4-DNP derivatives) could be used to differentiate bet...

Questions