Copper (Cu) has FCC crystal structure. Atomic mass of Cu is 63.55 gmol-1 and radius of a copper atom is 0.128 nm, mean speed of conduction electrons in Cu is 1.5×10 and frequency of vibration of the Cu atoms at 27 ° is 4×10. Nordheim’s Coefficient of Au in Cu is 5500 Ω−. a) Calculate the atomic density of copper b) Estimate the drift mobility of electrons in Cu c) Find the resistivity of pure Cu d) Find the resistivity of Cu if 1 at.% of Au is mixed in Cu

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.