3. A competency-based training program is one that requires the student to
a. receive at least four years of class-
room training
b. receive on-the-job training for at least
two years
c. demonstrate the ability to perform
specific job-related tasks
d. pass a series of written tests
4. The is most likely to handle the
day-to-day operations on the job site.
a. supervisor
b. project manager
c. architect
d. owner

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.