Engineering, 28.08.2020 17:01 staxeeyy767

Multiple Unit Material balance problem A feed containing equimolar amounts of methanol and water is mixed with 10 moles of a 40 % mol aqueous methanol stream. The mixture enters a first separation unit that creates two streams. A top stream exits the separation unit that contains 70 % mol methanol and rest water. The bottom stream, which is 70 moles enters a second separation unit. A top stream exists the second separation unit as a 50 % methanol & 50 % water mixture. The other stream is unknown. If the fresh feed to the system is 100 moles (equimolar mixture) and the two top streams exiting the separation units have the same flow, draw the flow sheet and find the molar flow and the composition of the bottom streams existing the second separation unit?

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

You know the right answer?

Multiple Unit Material balance problem A feed containing equimolar amounts of methanol and water is...

Questions