Engineering, 28.08.2020 21:01 jro20
Represent each of the following combinations ~f units in the correct SI form using an appropriate prefix:
(a) m/ ms,
(b) µkm,
(c) ks/ mg,
(d) km· µN.
Answers: 2
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Represent each of the following combinations ~f units in the correct SI form using an appropriate pr...
Biology, 22.09.2019 17:00
Mathematics, 22.09.2019 17:00
English, 22.09.2019 17:00
Physics, 22.09.2019 17:00
History, 22.09.2019 17:00
Social Studies, 22.09.2019 17:00
Chemistry, 22.09.2019 17:00
Business, 22.09.2019 17:00
Social Studies, 22.09.2019 17:00
Social Studies, 22.09.2019 17:00
English, 22.09.2019 17:00
Geography, 22.09.2019 17:00