Engineering, 02.09.2020 04:01 karankhatri1946

Verify concepts of phase equilibrium and phase transition using the steam tables. A. Establish by direct calculation this equality between molar Gibbs free energies for steam at 2.5 MPa and 224 oC : Gl = GvB. Calculate Gv at 2.5 MPa for temperatures between 225 and 400 oC and extrapolate this curve below 224 oC. C. Find Gl at 160, 170, 180, 190, 200, and 210 oC. Plot in the same graph used for part b and extrapolate above 224 oC. Hint: for a liquid, H and S can be taken as independent of P. D. Plot the molar volume V vs. T at P = 2.5 MPa over the T range between 150 and 400 oC, and show that V is discontinuous. E. Plot Cp vs. T at P =2.5 MPa over the T range between 150 and 400 oC, and show that Cp is discontinuous. F. Using the data in the steam tables, show that the Gibbs energies per unit mass of steam and liquid water in equilibrium at 300 oC are equal.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

You know the right answer?

Verify concepts of phase equilibrium and phase transition using the steam tables. A. Establish by di...

Questions