A rod with a cross-sectional diameter of d and length of L=5 in. and loaded in tension and bending with an axial force of P=2000 lbf and a bending force of F=1000 lbf at the end of the rod (the rod is fixed at the other end). First, use any bending force direction you used, draw the loadings on the 2-D cross-section of the fixed end and identify the point with the maximum stress. Then, using a material strength of 24 kpsi and a design factor of 3.0, determine the minimum diameter of a solid circular rod. Using Table A-17, select a preferred fractional diameter and determine the rod’s factor of safety.