Engineering, 04.09.2020 09:01 22savage2017
Let’s see if you understand your employer’s role in the PPE process. Place the options in the correct sequence by selecting the appropriate number from the dropdown menu. Then select the Check Answers button to submit your answer. Select the right PPE for the job Provide training on the hazards and the required PPE Perform a hazard assessment
Answers: 1
Engineering, 05.07.2019 19:10
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
Engineering, 06.07.2019 04:20
Steam enters a turbine at steady state at 2 mpa, 360°c with a velocity of 100 m/s. saturated vapor exits at 0.1 mpa and a velocity of 50 m/s. the elevation of the inlet is 3 m higher than at the exit. the mass flow rate of the steam is 15 kg/s, and the power developed is 7 mw. let g 9.81 m/s^2. determine: a)-the area at the inlet, in m^2 b)-the rate of heat transfer between the turbine and surroundings, in kw c)-draw a p-v diagram for this process.
Answers: 1
Engineering, 06.07.2019 05:10
Does the hardness of a sheet metal have an effect on its springback in bending? explain.
Answers: 1
Engineering, 06.07.2019 05:10
Air flows over a flat plate at a velocity of 3 m/sec and ambient conditions are, the pressure is 761 mm of hg and tempera- ture is 15°c. the plate is maintained at 85°c. if the length of the plate is 100 cm along the flow of the air, find out the heat lost by 50 cm of the plate which is measured from the trailing edge. plate width is 50 cm.
Answers: 1
Let’s see if you understand your employer’s role in the PPE process. Place the options in the correc...
Mathematics, 07.02.2022 21:50
Biology, 07.02.2022 21:50
Mathematics, 07.02.2022 21:50
Mathematics, 07.02.2022 21:50
Mathematics, 07.02.2022 21:50
Mathematics, 07.02.2022 21:50
Mathematics, 07.02.2022 21:50
Mathematics, 07.02.2022 21:50
Social Studies, 07.02.2022 22:00
Business, 07.02.2022 22:00