Engineering, 08.09.2020 14:01 skrillex88
An aluminum part will be subjected to cyclic loading where the maximum stress will be 300 MPa and the minimum stress will be-100 MPa (compressive).
a) Mean stress, om = MPa
b) Stress amplitude, a = MPa
c) Stress ratio, R =
Answers: 2
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
An aluminum part will be subjected to cyclic loading where the maximum stress will be 300 MPa and th...
Spanish, 14.10.2019 03:30
Spanish, 14.10.2019 03:30
History, 14.10.2019 03:30
Mathematics, 14.10.2019 03:30
English, 14.10.2019 03:30
Health, 14.10.2019 03:30
Biology, 14.10.2019 03:30
History, 14.10.2019 03:30
Physics, 14.10.2019 03:30