Engineering, 08.09.2020 14:01 yahnna8

Find the time-domain sinusoid for the following phasors: (a) 5+j4
(b) 5 -j4
(c)-5+j4
(d)-5-j4

Answers: 3

Show answers

Answers

Answer from: miyah1199

Answer:

a. r(t) = 6.40 cos (ωt + 38.66°) units

b. r(t) = 6.40 cos (ωt - 38.66°) units

c. r(t) = 6.40 cos (ωt - 38.66°) units

d. r(t) = 6.40 cos (ωt + 38.66°) units

Explanation:

To find the time-domain sinusoid for a phasor, given as a + bj, we follow the following steps:

(i) Convert the phasor to polar form. The polar form is written as;

r∠Ф

Where;

r = magnitude of the phasor = $\sqrt{a^2 + b^2}$

Ф = direction = tan⁻¹ ( $\frac{b}{a}$ )

(ii) Use the magnitude (r) and direction (Φ) from the polar form to get the general form of the time-domain sinusoid (r(t)) as follows:

r(t) = r cos (ωt + Φ)

Where;

ω = angular frequency of the sinusoid

Φ = phase angle of the sinusoid

(a) 5 + j4

(i) convert to polar form

r = $\sqrt{5^2 + 4^2}$

r = $\sqrt{25 + 16}$

r = $\sqrt{41}$

r = 6.40

Φ = tan⁻¹ ( $\frac{4}{5}$ )

Φ = tan⁻¹ (0.8)

Φ = 38.66°

5 + j4 = 6.40∠38.66°

(ii) Use the magnitude (r) and direction (Φ) from the polar form to get the general form of the time-domain sinusoid

r(t) = 6.40 cos (ωt + 38.66°)

(b) 5 - j4

(i) convert to polar form

r = $\sqrt{5^2 + (-4)^2}$

r = $\sqrt{25 + 16}$

r = $\sqrt{41}$

r = 6.40

Φ = tan⁻¹ ( $\frac{-4}{5}$ )

Φ = tan⁻¹ (-0.8)

Φ = -38.66°

5 - j4 = 6.40∠-38.66°

(ii) Use the magnitude (r) and direction (Φ) from the polar form to get the general form of the time-domain sinusoid

r(t) = 6.40 cos (ωt - 38.66°)

(i) convert to polar form

r = $\sqrt{(-5)^2 + 4^2}$

r = $\sqrt{25 + 16}$

r = $\sqrt{41}$

r = 6.40

Φ = tan⁻¹ ( $\frac{4}{-5}$ )

Φ = tan⁻¹ (-0.8)

Φ = -38.66°

-5 + j4 = 6.40∠-38.66°

(ii) Use the magnitude (r) and direction (Φ) from the polar form to get the general form of the time-domain sinusoid

r(t) = 6.40 cos (ωt - 38.66°)

(d) -5 - j4

(i) convert to polar form

r = $\sqrt{(-5)^2 + (-4)^2}$

r = $\sqrt{25 + 16}$

r = $\sqrt{41}$

r = 6.40

Φ = tan⁻¹ ( $\frac{-4}{-5}$ )

Φ = tan⁻¹ (0.8)

Φ = 38.66°

-5 - j4 = 6.40∠38.66°

(ii) Use the magnitude (r) and direction (Φ) from the polar form to get the general form of the time-domain sinusoid

r(t) = 6.40 cos (ωt + 38.66°)

Answer from: Quest

angvrswer:

vfg

grfhrtrhr:

jjj

yjujuju

jujuhuyhyt

bgf

bgr

gbr

bgr

gtr

bgr

gbgbbg

bgg

bbg

bfg

dcwf

fdb

ggb

rfe

gtg

gegte

gff

dfg

gfdsax

cvfbgnh

jmhngf

dsaazxscvb

nmhgb

fvdcsxaz

zxcv

bghn

Answer from: Quest

answer: copyright is extremely important to authors because it constitutes the ownership of one's original work. having ownership means you can protect your work as intellectual property and control who makes money from it—which is you and those to whom you assign rights.

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

You know the right answer?

Find the time-domain sinusoid for the following phasors: (a) 5+j4
(b) 5 -j4
(c)-5+j4...

Questions