The steam requirements of a manufacturing facility are being met by a boiler whose rated heat input is 5.5 x 106 Btu/h. The combustion efficiency of the boiler is measured to be 0.65. After tuning up the boiler, the combustion efficiency rises to 0.75. The boiler operates 4000 hours a year intermittently. Take the unit cost of energy to be $4.35/106 Btu. Assuming the same heat output for before and after the tunning:.

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.