Engineering, 21.09.2020 04:01 Sruyle51230
Calculate the rate of heat transfer from a bare carbon steel pipe (10 cm diameter, 0.5 cm thick) carrying steam at 200 C. Heat transfer coefficient inside and outside of the pipe are 300 and 100 W/m2.C respectively. We want to reduce the heat loss from the pipe by 95%. Calculate the thickness of the fiber glass insulation to achieve this objective. The heat transfer coefficient on the insulation remain the same as on the pipe. Pipe length is 200 meters.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Calculate the rate of heat transfer from a bare carbon steel pipe (10 cm diameter, 0.5 cm thick) car...
Mathematics, 18.11.2020 18:30
Mathematics, 18.11.2020 18:30
Mathematics, 18.11.2020 18:30
Biology, 18.11.2020 18:30
Mathematics, 18.11.2020 18:30
Mathematics, 18.11.2020 18:30
Medicine, 18.11.2020 18:30
Business, 18.11.2020 18:30
Physics, 18.11.2020 18:30
History, 18.11.2020 18:30