Engineering, 22.09.2020 14:01 cupcake3103670

Your first digital design assignment in your new job is to design a braking system for a driverless car. The system has 3 inputs that your circuit must depend upon: 1) An input signal x=1 will indicate the speed is greater than or equal to 50 mph.
2) An input signal y 1 will indicate that it is raining
3) An input signal z-0 will indicate that the distance to another car in front of your car is less than or equal to 100 ft. Your circuit is to generate a signal, F, to apply the brakes under any one of the following conditions
a. The speed is greater than or equal to 50 mph and the distance to the car ahead is less than or equal to 100 ft.
b. is raining and the distance to the car ahead is less than or equal to 100 ft
c. It is raining and the speed is greater than or equal to 50 mph
A. Write the switching expression for the output, F.
B. Expand F to SOP short form (list minterms) using only a K-Map
C. Write the short-form Product of Sums (maxterms). D] Determine the reduced Product of Sums expression from the K-Map.
E. Draw the simplest implementation for a NAND/NAND circuit.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

Answer

You know the right answer?

Your first digital design assignment in your new job is to design a braking system for a driverless...

Questions