Engineering, 23.09.2020 18:01 zafarm2oxgpmx

For an ideal, regenerative Rankine cycle utilizing steam as the working fluid, water enters the boiler (State 1) at 500 psi, becomes heated, and enters the turbine (State 2) at 500 psi and 900 deg F. Some of the steam is extracted from the turbine (State 3) at 50 psi and is directed to an open feedwater heater to heat the feedwater. The remaining steam exits the turbine (State 4) at 1 psi and enters the condenser. The condensed liquid is pumped into the open feedwater heater by Pump #1, and then is pumped from the open feedwater heater to the boiler by Pump #2. A. Draw the schematic arrangement and T-S diagram indicating all states.
B. Determine work for both pumps.
C. Determine steam extraction percentage going to the open feedwater heater.
D. Determine turbine work, net work, and cycle efficiency.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

You know the right answer?

For an ideal, regenerative Rankine cycle utilizing steam as the working fluid, water enters the boil...

Questions