Engineering, 24.09.2020 22:01 Mrabas
2. CSM Tech Publishing has added a branch office with about 50 users. The HR Department has given you a spread- sheet with the employee information that includes the employee name, office location, department, title, and so forth. Describe at least two different methods you can use to add these user accounts to Active Directory that don’t involve manual creation of each account from scratch.
Answers: 3
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 05.07.2019 23:20
Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket
Answers: 3
Engineering, 06.07.2019 04:20
An insulated tank truck containing 50,000 pounds of double-distilled, deionized water at 30 °c is pumped into a closed, refrigerated storage tank maintained at 5 °c in a facility located on top of mount mitchell, north carolina (elevation 6,684 feet & average july temperature of 84 °f). a)-determine the volume of the storage tank required to hold the purified water. b)- determine the initial and final pressure differences that must be overcome by a liquid pump assuming the storage tank initially contains air at 5 °c. assume the air is slowly bled out of the storage tank during the water transfer c.) during a routine operation today, the tank is slightly ruptured by a stainless steel pipe and a water acrosol of droplets begins to spray out of the storage tank. state all assumptions and determine the internal pressure within the water droplets produced
Answers: 1
2. CSM Tech Publishing has added a branch office with about 50 users. The HR Department has given yo...
Mathematics, 20.02.2021 04:50
History, 20.02.2021 04:50
Mathematics, 20.02.2021 04:50
History, 20.02.2021 04:50
Mathematics, 20.02.2021 04:50
Chemistry, 20.02.2021 04:50
Medicine, 20.02.2021 04:50
Biology, 20.02.2021 04:50
Mathematics, 20.02.2021 04:50
English, 20.02.2021 04:50
English, 20.02.2021 04:50
Social Studies, 20.02.2021 04:50