Engineering, 24.09.2020 22:01 tray71016

Water at 1MPa and 383 K enters a vertical pipe that is 10 m in length. The pipe has a diameter 0.1 m. The mass flow rate of the pressurized water is 1.5 kg/s. The pipe passes through a furnace and heat is transferred from the furnace to the water flowing through the pipe such that at steady state steam at 700 kPa and 873 K exits the pipe. Determine: a) the rate of enthalpy change between inlet and outlet of the pipe.
b) the rate of change in mechanical energy (kinetic and potential together) between inlet and outlet.
c) the rate of change in total energy between inlet and outlet.
d) the net transfer rate at which heat is transferred to water from the hot furnace.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

You know the right answer?

Water at 1MPa and 383 K enters a vertical pipe that is 10 m in length. The pipe has a diameter 0.1 m...

Questions