Engineering, 24.09.2020 22:01 spenceraniyah1

The wingtip bending vibration of an aircraft is modeled as a single DOF system with a spring and a mass. The wing is fixed at the root. The natural frequency of the wing is measured to be 6.1 Hz. When a fuel tank weighing 5,400 N is added at the wingtip, the natural frequency reduces to 5.2 Hz. Neglect damping effect. A. Determine the effective mass mi(not including the fuel tank) of the model.
B. Determine the effective stiffness k of the model.
y(t): vertical displacement of the wingtip
n,: effective mass of the wing my: mass of the fuel tank
m2 = m1 + mf
C. Determine the natural frequency (in rad/sec and Hz) when the fuel tank weight is reduced to 3,500 N due to fuel consumption.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

Answer

You know the right answer?

The wingtip bending vibration of an aircraft is modeled as a single DOF system with a spring and a m...

Questions