Engineering, 08.10.2020 09:01 shygrl05

Limestone (calcium carbonate) particles arestored in 50-L bags. The void fraction of the particulatematter

is .30(liter of void space per liter of total volume) andthe

specific gravity of solid calcium carbonate is 2.93.

a) estimate the bulk density of the bag contents

(kgCaCO3/liter of total volume)

b) estimate the weight (W) of the filled bags. State whatyou

are neglecting in your estimate.

c) the contents of three bags are fed to a ball mill, a

devicelike a clotes dryer containing steel balls. The

tumblingaction of the balls crushes the limestone particles and

turns theminto a powder. The limestone coming out of the mill is

putback into 50-L bags. Would limestone fill three bags, notfill

three bags completely, or fill more than three bags. Explain.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

You know the right answer?

Limestone (calcium carbonate) particles arestored in 50-L bags. The void fraction of the particulat...

Questions