Engineering, 08.10.2020 14:01 tannerroland

For the following problems for heat conduction in solids, state the 1) differential equation, 2) initial condition and/or boundary conditions, 3) solution method you would use to obtain answers to the questions below State and justify any assumptions that you make at arriving at your conclusions. Note: You do not need to solve the problems
a) A membrane is cured by heating a thin polymer film to a temperature of T1 throughout the entire thickness of the membrane. Curing is accomplished by sandwiching the membrane between two heated plates, which are brought to a temperature of T1 at a given time. You are interested in determining how long it will take to heat the entire thickness of the membrane to the temperature T1
b) A thick ceramic wall of thickness 10 cm is used to prevent heat from being transferred from a flash photolysis reactor to the surrounding room. If the thermal diffusivity of the ceramic is 3 x 10-7 m2ls, answer the following
1. Is the ceramic material sufficient to prevent measurable heat from being transferred to the room, if the flash photolysis reactor is operated for 1 s?
2. Is the ceramic material sufficient to prevent measurable heat from being transferred to the room, if the flash photolysis reactor is operated for 100 s?
3. What is the heat flux into the room if the flash photolysis reactor is operated continuously for several days?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

You know the right answer?

For the following problems for heat conduction in solids, state the 1) differential equation, 2) in...

Questions