subject
Engineering, 12.10.2020 20:01 abbyheule1440

Henry is a Londoner and politician in the 19th century who is concerned about the state of port facilities for the maintenance and repair of large shipping vessels. He believes that a complete overhaul of these facilities to meet the evolving requirements of ships employing steam engines is required. As he drafts a letter to his friend and fellow politician Reginald outlining what he believes is needed, how would he express the need for civil engineering? “As I’m sure you realize, Reggie, we would need to employ a civil engineer for this project who could properly design and plan the structural and mechanical systems necessary for this task.”

“Obviously, Reggie, what’s needed for this project are the services of a master builder to oversee the planning and design of what these new facilities would specifically require.”

“Reggie, I believe we’d need to ask the chief architect for the project whether a specific person should be required for the planning and design of the structural and mechanical systems of these facilities.”

“Reggie, I don’t know quite how to articulate what sort of person is necessary to oversee this work, but it would be someone with a keen eye for details and a wealth of construction experience.”

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
Henry is a Londoner and politician in the 19th century who is concerned about the state of port faci...
Questions
question
Mathematics, 30.11.2019 17:31
question
Mathematics, 30.11.2019 17:31
Questions on the website: 13722367