Engineering, 13.10.2020 03:01 niti1409
Two wooden planks each in thick and 1 / 2 in. thick and 9 in. wide, are joined by the dry mortise joint shown. Knowing that the wood used shears off along its grain when the average shearing stress reaches 1.20 ksi, determine the magnitude P of the axial load that will cause the joint to fail. Two wooden members of uniform rectangular cross section of sides a = 100 mm and b = 60 mm are joined by a simple glued joint as shown. Knowing that the ultimate stresses for the joint are sigma U = 1.26 MPa in tension and tau U = 1.50 MPa in shear and that P = 6 kN, determine the factor of safety for the joint when (a) alpha = 20degree, (b) 35degree, (c) alpha = 45degree. For each of these values of alpha, also determine whether the joint will fail in tension or in shear if P is increased until rupture occurs.
Answers: 1
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Two wooden planks each in thick and 1 / 2 in. thick and 9 in. wide, are joined by the dry mortise jo...
Physics, 27.03.2021 07:50
English, 27.03.2021 07:50
Chemistry, 27.03.2021 07:50
Computers and Technology, 27.03.2021 07:50
Mathematics, 27.03.2021 07:50
Biology, 27.03.2021 07:50
Mathematics, 27.03.2021 07:50
Mathematics, 27.03.2021 07:50
History, 27.03.2021 07:50
Biology, 27.03.2021 07:50
Mathematics, 27.03.2021 07:50
Mathematics, 27.03.2021 07:50
Mathematics, 27.03.2021 07:50
Mathematics, 27.03.2021 07:50