Engineering, 13.10.2020 23:01 jstamey757

What I Have Learned Dras a conciusion
Question/Problem
Observation
Scientific Method
Independent
Dependent
pothesis
Test che pothesis
of the world around you
where you
steps. By Datong a detailed (3)
through your senses, you can be able to formulate a (4)
step will lead you to an educated guess called (52
by designing and conducting an
and (8)
variables. The data
The summarized
guess you need to (6)
experiment. In the experiment you need to identify the variables present and these
are the (7)
from the experiment will be collected to (9)
results from the experiment will determine whether the hypothesis is accepted or
rejected and that is where you (10)
se is the grem sentences inside the box site your answer on a separate sheet
DirectionsPead the paragrape carefully and identify the correct words that
a process that involves observation, data
sathering, experimentation and analysis. This method is composed of (2) -
can bave tentative ansver to your question. In order for you to prove your educated

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re,e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)

Answers: 3

Answer

Engineering, 06.07.2019 02:30

Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.

Answers: 1

Answer

You know the right answer?

What I Have Learned Dras a conciusion
Question/Problem
Observation
Scientific Method...

Questions