Engineering, 16.10.2020 06:01 Ashley606hernandez
Explain and justify which type of model to use in the final design phase to present to a client.
Answers: 1
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Explain and justify which type of model to use in the final design phase to present to a client....
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Computers and Technology, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00
Mathematics, 18.03.2021 02:00