Engineering, 16.10.2020 14:01 angeljaylyn123
Two pipes with length, thickness and outer diameter of 4 m, 0.4 cm and 10 cm, respectively, are used for transporting superheated vapor in a manufacturing plant. The pipes with thermal conductivity of 55 W/m. K are connected to each other through two 1-cm-thick flanges of outer diameter 19 cm. The superheated vapor flows inside the pipe at an average temperature of 483 K with a heat transfer coefficient of 180 W/m^2 .K. Air condition surrounding the pipes has a temperature of 283 K and a convection heat transfer coefficient of 25 W/m^2 .K.
Required:
a. Determine the average outer surface temperature of the pipe, disregarding the flanges.
b. Considering the flanges as the fins and using this temperature for the base of the flange, determine the fin efficiency and the rate of heat transfer from the flanges.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
You know the right answer?
Two pipes with length, thickness and outer diameter of 4 m, 0.4 cm and 10 cm, respectively, are used...
Questions
Mathematics, 07.04.2020 22:53
Mathematics, 07.04.2020 22:53
Mathematics, 07.04.2020 22:53
Computers and Technology, 07.04.2020 22:53
History, 07.04.2020 22:53
