Engineering, 17.10.2020 19:01 gasparesparzajr

A liquid mixture containing 18.0 wt% water, 37.0 wt% methanol, 17.0 wt% ethanol, and the balance propanol is fed at 250.0 lbm/min into an evaporator operating at steady state. Two streams exit the evaporator: a vapor stream and a liquid stream, both of which contain all four components. The mass fraction of methanol in the vapor stream is 0.440 , the mass fraction of propanol in the liquid stream is 0.410 , and 60.0 % of the ethanol in the feed stream ends up in the vapor stream. The ratio of the total mass flow rate of the vapor exit stream to the total mass flow rate of the liquid exit stream is 1.21. Draw and label a flow sheet for the process. Label the total flow rate of each stream with a unique symbol. Label the mole fractions in each stream with unique symbols. You should have a total of 15 unique labels (3 flow rates and 12 mole fractions.) Degree-of-Freedom Analysis Total number of process variables: 15 Number of variables directly specified in problem statement: 3 Number of material balances: Number of constraints: Number of other constraints in the problem statement: Degrees of Freedom:

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.

Answers: 3

Answer

You know the right answer?

A liquid mixture containing 18.0 wt% water, 37.0 wt% methanol, 17.0 wt% ethanol, and the balance pro...

Questions