subject
Engineering, 19.10.2020 21:01 wendyar79

Two solid objects cannot occupy the same space at the same time. Indeed, when the objects touch, they exert repulsive normal forces on each other, as well as frictional forces that resist their slipping relative to each other. These contact forces arise from a complex interplay between the electrostatic forces between the electrons and ions in the objects and the laws of quantum mechanics. As two surfaces are pushed together these forces increase exponentially over an atomic distance scale, easily becoming strong enough to distort the bulk material in the objects if they approach too close. In everyday experience, contact forces are limited by the deformation or acceleration of the objects, rather than by the fundamental interatomic forces. Hence, we can conclude the following: The magnitude of contact forces is determined by , that is, by the other forces on, and acceleration of, the contacting bodies. The only exception is that the frictional forces cannot exceed (although they can be smaller than this or even zero).

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
Two solid objects cannot occupy the same space at the same time. Indeed, when the objects touch, the...
Questions
question
Mathematics, 07.12.2021 22:10
question
Mathematics, 07.12.2021 22:10
question
Mathematics, 07.12.2021 22:10
Questions on the website: 13722367