Engineering, 21.10.2020 16:01 mackenziewright2002

A smokestack emits pollutant A into the air on a sunny day. The effective stack height is 400 m. The wind speed is 4 m/s, due east. Your house is located 5.0 km due east of the smokestack. The ground level concentration of pollutant A is 2.0 mg/m3 at your house. Your friend lives 5.0 km east and 1.0 km south of the smokestack. a. What is the emission rate of the pollutant in kg/s?For the emission rate determined in part a, you now want to know the concentration of pollutant X at ground level at your friend’s house. b. What parameters change in the dispersion modeling equation? For each parameter, include the parameter symbol, a definition of the parameter, and its new quantitative value. c. Is the concentration at your friend’s house lower, the same or higher than the concentration at your house and why?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Wiy doeres rere okhn a pump whon working betwon the same pressure range?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

Answer

Engineering, 06.07.2019 02:30

An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?

Answers: 3

Answer

You know the right answer?

A smokestack emits pollutant A into the air on a sunny day. The effective stack height is 400 m. The...

Questions