subject
Engineering, 21.10.2020 17:01 daniel2humnle

Nitrogen fixation by the Haber-Bosch process (1909-1914). This remarkable hydrogenation discovered or invented by Prof. Haber and commercialized by Dr. Bosch makes ammonia (a key ingredient in fertilizers and in explosives) from nitrogen and hydrogen by the very high-pressure reaction Its use in agriculture is directly responsible for saving millions of people from starvation these last 70 years. On the other hand, it also allowed the First World War to drag on for three extra years, resulting in untold casualties and misery.
As part of this process, suppose a mixture of 3 parts H2 and 1 part N2 at 0 degree C and 2.5 MPa flows at a superficial velocity of u0 = 1 m/s downward through a packed bed of spherical particles which rest on a holey plate which in turn rests on 8 L-shaped supports, evenly spaced around the tube wall.
Find the downward force (in newtons and in kilograms) exerted on each of the L-shaped supports by the gas flowing through the packed bed of catalyst. Ignore the resistance of the holey plate. Data: Particles: spherical, dp = 2 mm.
Gas: At these conditions the feed mixture behaves as an ideal gas with mu = 2 * 10^-5 kg/m . s.
Bed: diameter = 1 m, height = 300 mm, voidage = 0.4, total weight of packing and with its support plate = 700 kg.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 Β°f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
You know the right answer?
Nitrogen fixation by the Haber-Bosch process (1909-1914). This remarkable hydrogenation discovered o...
Questions
Questions on the website: 13722362