Match the scenario with the option that is involved. 1.
accumulator
Cheryl is an engineer and has just been hired to work on her
first assignment: an instrument is needed to cut through thick
metal, but it must use precise and steady movements. It must
also be small enough to be handheld.
An amusement park ride is not receiving enough power to
2. launch at high speeds. Tom, an engineer, is called in to
diagnose why the ride is not working properly.
Jacob is designing a new space probe that needs to be able
3. to move large rocks out of its way so it can explore the
terrain of Mars.
hydraulic system
pneumatic power system

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)