Engineering, 23.10.2020 01:01 Kitty10101

Hi, I need a hand please. Describe how you would use principles of series circuit to analyze a parallel circuit. What formulas used in a series circuit analysis would not apply?

Answers: 3

Show answers

Answers

The principles of a series circuit that can be used to analyze a parallel circuit is that of calculating total resistance in the circuits.

The formula used in a series circuit analysis for finding total resistance is different from that used in a parallel circuit for finding overall resistance. i.e.

For a series circuit total resistance Rt={R1+R2+R3+Rn}

For a parallel circuit, total resistance 1/Rt ={1/R1+1/R2+1/R3+1/Rn]

Explanation:

In a series circuit, the current passing through each component is the same where as in a parallel circuit the voltage through each component is the same.

The principles of series circuit that can be used to analyze a parallel circuit is that of calculating total resistance in the circuits. In a series circuit, total resistance is calculated as the sum of resistance of the components connected to the circuit, where as in a parallel circuit, overall resistance is the summation of the resistance of individual components.

This means you can use principles of series circuit to find total resistance then use that value to confirm the individual resistance values of components in a parallel circuits. This is possible because you will have the expected total resistance [calculated from the series circuit], then the sum of resistance of the same but individual components now in the parallel circuit should be equal to the total resistance calculated from the series circuit.

The formula for calculating resistance in series circuit given as :{Rt= R1+R2+R3+Rn} where Rt is the total resistance and R1,R2,R3...Rn are the values of individual components in the series circuit, can not be used in finding overall resistance in a parallel circuits because the formula for total resistance will change to : [1/Rt =1/R1+1/R2+1/R3+1/Rn]

Answer from: Quest

answer:

d. attempt to find the owner, then leave your information if you cannot find them.

explanation:

d. represents both (b) and (c).

more logical as well.

b and c are to complicated.

glad i could , give me a follow, so if you need with any other question, im here.

Answer from: Quest

answer: hi

explanation:

Another question on Engineering

Engineering, 04.07.2019 18:10

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

Hi, I need a hand please. Describe how you would use principles of series circuit to analyze a para...

Questions