Engineering, 26.10.2020 17:00 kcarstensen59070
cylindrical specimen of this alloy 32 mm in diameter and 188 mm long is to be pulled in tension. Assume a value of 0.34 for Poisson's ratio. Calculate the stress (in MPa) necessary to cause a 0.0105 mm reduction in diameter.
Answers: 1
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
cylindrical specimen of this alloy 32 mm in diameter and 188 mm long is to be pulled in tension. Ass...
Mathematics, 09.04.2021 20:10
English, 09.04.2021 20:10
Mathematics, 09.04.2021 20:10
Mathematics, 09.04.2021 20:10
Mathematics, 09.04.2021 20:10
Mathematics, 09.04.2021 20:10
Mathematics, 09.04.2021 20:10
Social Studies, 09.04.2021 20:10
English, 09.04.2021 20:10
Mathematics, 09.04.2021 20:10